Brackets and Tabs
Roll Bar Mounting foot top and bottom
Your Price: Price $$44.00
This kit would mount the B hoop to the step of your Scout II or traveler body. This is the strongest place to mount a hoop. This is a kit with 2 upper plates and 2 lower plates. All made in USA fro...
Large Anything Scout Fabrication Gusset
Your Price: Price $$3.50
Anything Scout exclusive gusset series. This is our large gusset 4" x 4" laser cut from 1/4" mild steel. Sold each.
Medium Anything Scout Fabrication Gusset
Your Price: Price $$3.00
Anything Scout exclusive gusset series. This is our medium gusset 3" x 3" laser cut from 1/4" mild steel. Sold each.
Small Anything Scout Fabrication Gusset
Your Price: Price $$2.50
Our own custom gussets. These are 90 degree gussets and have a nice relief for weld in the corner. Laser cut from 1/4" steel. Sold each. This gusset is 2" x 2"
Single 2.5" 1.75 poly bushing
Your Price: Price $$12.00
Single poly bushing with 2.5" or 3" overall mounting width and 1.50" minor diameter (Chevy leaf spring bushings) and 1.75 major diameter. 9/16" bolt hole.
2.5 x 1.75 DOM Sleeve and Bushing
Your Price: Price $$22.00
Single poly bushing with 2.5" or 3" overall mounting width and 1.50" minor diameter 1.75" major diameter and 2.0" OD Heavy Duty DOM sleeve with Grease zerk. DOM sleeve is 2...
Single 2.5 x 1.75 DOM Sleeve
Your Price: Price $$12.50
Weldable 2.0" OD .250" wall Heavy Duty DOM sleeve with zerk fitting for 1.5" minor diameter bushings. Available for 2.5" or 3.0" wide bushings. DOM sleeve is 2.0" wide...
Trackbar / Panhard Mount
Your Price: Price $$30.00
Custom laser cut trackbar or panhard bracket. Does not come welded. Please specify 6" or 7" tall to center of bolt. These are made for a 3" axle tube but will work on a scout axle. L...
Skull Gusset 90 degree
Your Price: Price $$4.50
90 degree gusset extra big for those big fab projects. 4" x 4" x 3/16" mild steel with the Ballistic Fabrication skull shape. Laser cut. Sold each
Front U-bolt Kit HD 5/8"
Your Price: Price $$55.00
This is a match to our HD rear u bolt kit. This is for a Scout II front Dana 44. 5/8" u bolts with HD nuts and washers. These are bomp proof and an excellent upgrade to your suspension system.
Axle Side Mount Shock Bracket
Your Price: Price $$26.00
Sold as pair. These are perfect for mounting a shock off of the axle tube or off of a flat surface. CNC pressed braked and laser cut. With these you can mount 1 1/4", 1 1/2", or 1 3/4&quo...
Dana 27/30 Axle Spring Perch
Your Price: Price $$35.00
Spring perches for your Dana 27 or 30. These are made to fit and 1/4" thick. Sold as a pair made in USA.
Shock Tabs
Your Price: Price $$12.00
These work perfectly for any SOA (spring over conversion) on the front or rear axle. Compatible with any axle from Dana 30 to a rockwell. Simple to weld on and strong. Sold in pairs
Flat bottom shock tab (pair)
Your Price: Price $$5.00
Your basic Shock Tab, 1.75" from centerline to mounting surface. This one has a flat bottom making it very versatile in actual use. If I could only have 1 shock tab in the shop this would be i...
Paired Flat mount Shock Bracket
Your Price: Price $$15.00
by joining 2 together to make a bracket, this bridge between tabs also makes the combination more than twice as strong as when used individually. And it saves 15 minutes over single tabs every time...
Threaded Bung 7/8" x 18 - Left
Your Price: Price $$13.00
This is a threaded tube adapter for large taper GM or Ford tie rod ends and drag link ends. Requires a 1" ID DOM tubing. Super nice quality and machined to put a wrench on it. Remember these a...
Small fabrication gusset
Your Price: Price $$3.00
Small fabrication gusset 1 1/2" x 1 1/2" with single small hole. 1/8" thick. Perfect for strengthening up small brackets and tabs. Sold each
Gusset - 3 hole 90degree
Your Price: Price $$5.00
Simple gusset to beef up a suspension or roll cage fab project. 3" x 3" x 3/16"
Shock Tab - angled pair
Your Price: Price $$8.00
These are quality 1/4" shock mounts with a handy angle in them. This helps different mounting situations. Sold as a pair made for 1 1/2" to 1 3/4" tubing.
Crossmember mounting brackets
Your Price: Price $$48.00
This is what you need to make that Crossmember bulletproof and still vibration dampening, it comes with everything and is made of 2.0" DOM with a .25" wall and .375 Tabs for frame mountin...