
Your Price: Price $$850.00
Spring Over Axle (SOA) Kit. Complete do it yourself kit. Includes: D44 front axle center section only with axle tubes and C's.(cleaned, cut and turn on knuckles {C's}, perches and shock mounts), Z...
Your Price: Price $$865.00
Oh yes there is a bolt on lift kit for your Scout 80/800. It will provide 2 1/2" lift on your Scout and will improve the on-road and off-road capability. We have found that this lift with a 4&...
Your Price: Price $$74.00
Scout II CPT front shackle set. Extra heavy duty 3/8" thick one piece shackle plates. Allows use of factory swaybar. 5" bolt to bolt length will lift front suspension approximately 1"...
Your Price: Price $$29.00
Complete set of 4 Shackles. Enough to do one end of the suspension.
Your Price: Price $$580.00
Rough Country lift kit. This is a good kit if you are on a budget and want to get the job done. It is not the same quality as a Skyjacker Softride kit. But, it will give you good performance at a v...
Your Price: Price $$595.00
Rough Country lift kit. This is a good kit if you are on a budget and want to get the job done. It is not the same quality as a Skyjacker Softride kit. But, it will give you good performance at a v...
Your Price: Price $$100.00
Complete 2" Scout II body lift kit. This is one of the only kits that is specifically made for a Scout II. Body lifts can be very useful in your project and are safe in moderation. 2" is ...
Your Price: Price $$90.00
Finally a complete body lift kit specifically for a Scout II. This is the only kit that includes everything you will need to do the job right. There are a lot of fears with body lifts. We think th...
Your Price: Price $$15.00
Scout II bumpstop. If you have ever heard a loud bang going over a bump. Your bumpstop may be gone. Get these new poly bump stops. They are an exact bolt in part. These fit the front of the Scout...
Your Price: Price $$75.00
This Tom Woods custom drive shaft u joint will give you clearance so your driveline will not bind. Effectively gives 10 degrees more useful angle to your driveline. Only recommended on the Front dr...
Your Price: Price $$10.25
Stock replacement shackle for Scout II. These are 3 3/4" from hole to hole and 1/4" thick with 7/16" holes. A note on shackles. Longer shackles decrease good caster and can make you...
Your Price: Price $$37.50
Anything Scout Exclusive 5" heavy duty shackles. Made from super heavy duty metal to handle all of your off-road abuse. Uses the existing hardware. Includes two shackles.
Your Price: Price $$48.00
Custom Super HD shackle hangers. Perfect for beefing things up or moving your springs around. Also great for installing Scout II springs on your Scout 80 or 800. Include bushings with 9/16" bo...
Your Price: Price $$55.00
Pair of HD premium shackles. This is our best shackle kit. They are easy to install and strong like the wind. These are 5" center to center and are the longest shackle that we recommend. These...
Your Price: Price $$99.95
Doing your own reverse shackle? This can help get it done right. This is a CPT shackle only kit. Comes with 5" shackle and everything you need to sleeve the frame and get your shackle on the b...
Your Price: Price $$12.80
1020 DOM tube adapter. 7/8" 14 tpi 1.0" ID 1.5" OD. Right thread,. THIS IS NOT FOR GM,FORD, DODGE TIE ROD ENDS.
Your Price: Price $$11.00
303 SS Rod End Spacer for 3/4" bore. Sold as a pair. Stainless steel
Your Price: Price $$38.00
These joints are simply the strongest and best available with superior load ratings and a self cleaning Kevlar/Teflon liner. Body is built from Chrome Moly alloy steel, heat treated and coated for ...
Your Price: Price $$34.00
These joints are simply the strongest and best available with superior load ratings and a self cleaning Kevlar/Teflon liner. Body is built from Chrome Moly alloy steel, heat treated and coated for ...
Your Price: Price $$34.00
These joints are simply the strongest and best available with superior load ratings and a self cleaning Kevlar/Teflon liner. Body is built from Chrome Moly alloy steel, heat treated and coated for ...
Your Price: Price $$12.00
Single poly bushing with 2.5" or 3" overall mounting width and 1.50" minor diameter (Chevy leaf spring bushings) and 1.75 major diameter. 9/16" bolt hole.
Your Price: Price $$22.00
Single poly bushing with 2.5" or 3" overall mounting width and 1.50" minor diameter 1.75" major diameter and 2.0" OD Heavy Duty DOM sleeve with Grease zerk. DOM sleeve is 2...
Your Price: Price $$12.50
Weldable 2.0" OD .250" wall Heavy Duty DOM sleeve with zerk fitting for 1.5" minor diameter bushings. Available for 2.5" or 3.0" wide bushings. DOM sleeve is 2.0" wide...
Your Price: Price $$55.00
This is a match to our HD rear u bolt kit. This is for a Scout II front Dana 44. 5/8" u bolts with HD nuts and washers. These are bomp proof and an excellent upgrade to your suspension system.
Your Price: Price $$27.00
Stock inner front left (driver side)shackle. Used to hold the front anti-sway plate. Nice and new.
Your Price: Price $$27.00
Stock inner front right (passenger side)shackle. Used to hold the front anti-sway plate. Nice and new.
Your Price: Price $$35.00
Spring perches for your Dana 27 or 30. These are made to fit and 1/4" thick. Sold as a pair made in USA.
Your Price: Price $$37.50
Doing a spring over? These are the trick. They allow to move the axle 1" forward or back. Help reduce axle wrap. Sold in pairs. Super heavy duty. Sold as a pair. NOTE - 3 of these will work ...
Your Price: Price $$5.00
Your basic Shock Tab, 1.75" from centerline to mounting surface. This one has a flat bottom making it very versatile in actual use. If I could only have 1 shock tab in the shop this would be i...
Your Price: Price $$15.00
by joining 2 together to make a bracket, this bridge between tabs also makes the combination more than twice as strong as when used individually. And it saves 15 minutes over single tabs every time...
Your Price: Price $$295.00
Complete front reverse shackle kit. This is a solid and well thought through kit. Includes everything you need to RS your Scout II or Scout 800 front springs. Indicate in the comment box which mode...
Your Price: Price $$37.50
These shocks are available for 0"-4" lift Scout II suspensions. The are Medium duty affordable shocks. They will have a soft ride and work well on the road or for light trail driving. A g...
Your Price: Price $$8.00
These are quality 1/4" shock mounts with a handy angle in them. This helps different mounting situations. Sold as a pair made for 1 1/2" to 1 3/4" tubing.
Your Price: Price $$99.00
15" travel shocks!! these will maximize the suspension travel on your custom suspension or even on your standard SOA system. You will need to fabricate or buy our long travel towers to fit the...
Your Price: Price $$12.50
5/8"x 2 3/4"x 10" - This is a pretty much standard U bolt made to fit a D44 axle, the exceptions are that they are .625" (5/8) Rolled Threads for extra strength and the threadin...
Your Price: Price $$13.00
This is one weld in threaded bung for tubing with a 1" ID. We use these for our SHD tie rod and drag links which are 1 1/2" x .250 wall. one left bung
Your Price: Price $$13.00
This is one weld in threaded bung for tubing with a 1" ID. We use these for our SHD tie rod and drag links which are 1 1/2" x .250 wall. one right bung
Your Price: Price $$44.00
Super heavy duty shackle hangers. Sold as a pair with bushings. These are for 2 1/2" leaf springs such as GM or aftermarket 44044 wagoneer springs. Perfect for an axle swap or HD suspension j...
Your Price: Price $$5.00
Link tab fit Dana 44 or Ford 9" tubes. Straight mount and sold as each. 1 per order. (Even though they are pictured as a pair) 3/8" thick with standard 9/16" hole.
Your Price: Price $$35.00
This is a Leaf Spring hanger bracket made in Scout leaf spring widths. We are making 2 models of Scout spring hangers to choose from so decide what works best for you. Made from .25" (1/4) HR ...
Your Price: Price $$50.00
This Link Bracket is uniquely designed to mount either a Uniball (RE, JJ, or Summit), or a Heim (even the Evo's fit) on the inside frame rail. It is adjustable in the fact you decide just what you ...
Your Price: Price $$10.00
Link mounts for 1 3/4" tubing. These are sold as a pair and are offset for 10 degrees of angle. These would be useful for upper link mounts mounted to heavy wall DOM tubing and your wanting to...
Your Price: Price $$10.00
This is a pair of link mounts. They fit 1 3/4" tubing and are drilled to 5/8". 3/8" thick and super burly. Great for air shocks or coil over shock. Sold as a pair. (Equal length tabs)
Your Price: Price $$50.00
This is our best shackle kit. Includes two HD 3/8" shackles with all bolts and hardware. 5" inch eye to eye. This is the maximum we recommend for shackle length. These are a burly pair of...
Your Price: Price $$35.00
Anything Scout Exclusive 4" heavy duty shackles. Made from super heavy duty metal to handle all of your off-road abuse. Uses the existing hardware. Includes two shackles.
Your Price: Price $$35.00
Dana 44 or Dana 60 HD ubolt plates for 2" Scout II springs. Works with our ubolt plates to allow you to move your axle forward or back 1". 3/8" thick and super tough. Sold in pairs.
Your Price: Price $$40.00
These bushings replace your old worn out spring bushings for your Scout 80 or 800. These fit 61-68 SMALL id spring eyes. 6 bushings will do two leaves and the frame for those two leaves. 2 packs re...
Your Price: Price $$50.00
These towers are fairly easy to install and work great for 12-15" travel shocks. Great for spring overs or just more travel on your spring under lift. Sold in pairs.
Your Price: Price $$40.00
Improve the ride and handling of your Scout. Helps get rid of suspension noises and quirks. One package does 2 springs and the corresponding (2) frame bushings. 2 packages required per vehicle. For...